Special Connectors specialise in producing great value custom IDC cable assemblies, from simple point to point insulation displacement connector cables to daisy chain and breakout cables. Whatever your location Special Connectors¡¯ experienced sales and engineering teams will help you from design through to production.
Quality is at the heart of Special Connectors¡¯ offing, facilities are UL & ISO 9001:2008 certified. Where customers require UL traceability, Special Connectors ensure materials and components always meet their needs. UL file number and ISO certification (embed PDF). UL file numberand ISO certification.
Assemblies are 100% tested guaranteeing reliability and compliance, a variety of appropriate tests are applied depending on cable assembly type. Examples are: Short or open circuit, intermittent circuit, mis-wiring. Hi-Pot, static load for strain relief, bending test, crimp pull off force, contact to housing retention force and plastic hardness.
Insulation displacement cable mount connectors are normally female and have an option for strain relief, which offers protection to the terminated contacts. Number of connector contacts is between 4 and 100 depending on the pitch and style required.
IDC cable assemblies with terminated sockets normally mate with PCB headers, normally with male pins. On 1.27mm pitch staggered micro types the male connector is mounted on the cable (male-on¨Cwire) and female header on the PCB, reversing the standard orientation.
A bump on the socket and tab on the header allow the mating header and socket to only mate together in the correct orientation, this is known as ¡®polarisation¡¯, there are also options for locking latches on headers which allow the mated header and socket to lock together.
Board-in, or transition connectors allow an inexpensive way of permanently connecting a ribbon cable to a PCB, the cable is terminated to the connector, which is soldered, or pushed by press fit into the PCB. This is a ¡®fit and forget¡¯ solution which is not pluggable.
Special Connectors offer both industry standard branded connectors, such Molex Picoflex or TE Micro Match sockets and high quality low cost alternatives. The alternatives are fully intermatable with branded connectors and often have a smaller MOQ and shorter lead time. A wide range of IDC connector pitches are available to fit ribbon cable ranging between 0.635 to 2.45mm pitch.
Standard ribbon cable is grey with red strip identifying pin 1, there are other options, such as rainbow ribbon and Twist ¡¯N Flat and shielded. Additional options include cable marking in various styles, including labels. Assemblies may be custom packaged to meet your specifications. Environmental options, such as halogen free are also available.
